D.M. Fabrication Division
Equipment and Capabilities
Fabrication Capabilites
Carbon Steel 20 Gauge thru 8 inches - Stainless Steel 20 Gauge thru 3 inches - Aluminum 20 Gauge thru 2 inches
Crane Capabilities: 12 cranes ranging from 1 ton to 25 tons
Production Equipment
Flame Cutting: 4 Torch Electric Eye, table size 96" by 240" - MG Plasma Cutting, table size 120" x 240"
Shearing: HTC Shear, maximum 1/2 inch thick by 10 feet wide
Forming: HTC Brake Press, 400 ton by 10 feet wide
Rolling: Rolshear Roll, maximum 1/2 inch thick by 6 feet wide
Worthington Roll, Plate 1" thick x 192", Angle 6" x 1/2" thick
Beam and Plate Welding: Lincoln Submerged Arc Welder 1000 Amp
Machining and Metal Finishing Capabilities
Lathes: Niles Engine Lathe, 24" max, O.D. x 20' long - (2) Harrison Lathes 17" max. O.D. x 80" long - #3 Warren Swasey Turret Lathe - Bullard 36" O.D. Cutmaster Verticle Turret Lathe - Cincinnati 100" O.D Verticle Turret Lathe
Milling: Collet Floor Bar 14' verticle x 6' head travel - Cincinnati Hypo Vertical / Horizontal Mill 10 ' column x 240" bed with 4 milling heads - Mitsubishi traveling column boring bar 8' x 30' - Bridgeports with digital readout and power feed
Drilling & Grinding: (2) American Radial; 15" column with 6' arm & 13" column with 5' arm - 36" Blanchard Grinder
Metal Finishing: Brinks Paint Booth 30' x 100' - Blast Booth with steel shot 20' x 40' - 100 psi Silica Sand Booth 20' x 60' - Glass Bead Booth 20' x 50' - Testing: Ferroxyl, Dye Penetrant, Hydrostatic
